Reward Gold Mine Underground Loader Purchased
Released
Released
Announcement PDF
ASAS
REWARD GOLD MINE UNDERGROUND LOADER PURCHASED
ASX ANNOUNCEMENT 19TH MARCH 2025
Vertex Minerals Limited (ASX: VTX) (“Vertex” or “the Company”) is pleased to announce the purchase of an
Aramine L350D Loader to be incorporated into the underground fleet at the Reward Gold Mine. The loader is
specifically designed for small size gold mining. For its size it is very powerful with a 4t carrying and loading
capacity. It is also a very comfortable and safe machine to operate, as it has its cabin in the centre of the machine.
Vertex has purchased the L350D loader for production work in the Reward Mine. It will be fitted with remotes so
that the machine can be operated from a remote location. This enables Vertex to undertake long hole stoping
which requires the loader to operate in unsupported ground. The new L350D loader has an 8-week delivery time.
Figure 1 Aramine L350D purchased by Vertex (similar picture only)
Figure 2 Showing the specification of the Aramine L350D loader
W. www.Vertexminerals.com
E. info@vertexminerals.com.au
ASAS
On a separate front, engineering staff have been exploring the areas of the mine above the 640 Amalgamated
level. These areas are presently accessible by ladders only but will eventually be accessible by an incline ramp for
access with jumbos and loaders.
Figures 3 and 4 show current faces with multiple vein exposures up to 6m in width. This represents an exciting
opportunity for mining significantly wider stopes than the 1.5m wide stopes envisaged in the PFS. The inclusion
of the ore sorter in the processing plant means that Vertex can reject the waste rock between the veins prior to
gravity processing.
This ability to sort quartz from country rock is significant as it changes the mining economics of this style of
mineralisation. (refer to VTX ASX announcement 24th September 2024) While sampling and assay of these faces remain to be
completed, these exposures provide an indication that wider stope widths are possible in some areas and are
likely to have a positive impact on stope productivity.
Figure 3 – Mining Engineer Tom Cowan and multiple veins (VTX 14 March 2025)
Quartz veins (white) in Greywacke country rock. (grey). The veining style in this photo is parallel. This photo is
intended to show the scale of the quartz veining and does not imply grades or tonnes
W. www.Vertexminerals.com
E. info@vertexminerals.com.au
ASAS
Cautionary Statement
Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses
where concentrations or grades are the factor of principal economic interest. Visual estimates also potentially
provide no information regarding impurities or deleterious physical properties relevant to valuations.
Figure 4 – Stockwork veins exposed in 6m wide face (VTX 14 March 2025)
Quartz veins (white) in Greywacke country rock. (grey) The style of veining ranges from parallel with some
stockwork. This photo is intended to show the scale of the quartz veining and does not imply grades or
tonnes.
Vertex Director and Mining Engineer Declan Franzmann commented:
“The purchase of a tele-remote capable underground loader provides the flexibility to mine wider stopes using
modern mining techniques. The inclusion of ore sorting in the process flow sheet provides VTX with the ability
to improve the economics of mining quartz stockwork style mineralisation, which is evident at the Reward Gold
Mine.”
This announcement has been approved by the Vertex Board of Directors
Further Information:
Roger Jackson, Executive Chairman
Tully Richards, Technical Director
tully@vertexminerals.com.au
Follow Vertex Minerals on LinkedIn
W. www.Vertexminerals.com
E. info@vertexminerals.com.au
Share your feedback
Discover